[C#] Bgr24彩色位图转为灰度的Bgr24位图的跨平台SIMD硬件加速向量算法
在上一篇文章里，我们讲解了“Bgr24彩色位图转为Gray8灰度位图”算法。本文将探讨“Bgr24彩色位图转为灰度的Bgr24位图”。区别在于目标位图也是Bgr24格式的，只是将像素数据由彩色转为了灰度。这些算法也是跨平台的，同一份源代码，能在 X86及Arm架构上运行，且均享有SIMD硬件加速。一、标量算法
1.1 算法实现
算法原理与上一篇文章是一样，唯一区别是目标位图的地址计算与写入处理。因为现在对于每一个像素，需要写入3个字节。
源代码如下。
public static unsafe void ScalarDoBatch(byte* pSrc, int strideSrc, int width, int height, byte* pDst, int strideDst) {
const int cbPixel = 3; // Bgr24
const int shiftPoint = 16;
const int mulPoint = 1 << shiftPoint; // 0x10000
const int mulRed = (int)(0.299 * mulPoint + 0.5); // 19595
const int mulGreen = (int)(0.587 * mulPoint + 0.5); // 38470
const int mulBlue = mulPoint - mulRed - mulGreen; // 7471
byte* pRow = pSrc;
byte* qRow = pDst;
for (int i = 0; i < height; i++) {
byte* p = pRow;
byte* q = qRow;
for (int j = 0; j < width; j++) {
byte gray = (byte)((p * mulRed + p * mulGreen + p * mulBlue) >> shiftPoint);
q = q = q = gray;
p += cbPixel; // Bgr24
q += cbPixel; // Bgr24 store grayscale.
}
pRow += strideSrc;
qRow += strideDst;
}
}1.2 基准测试代码
使用 BenchmarkDotNet 进行基准测试。
可以使用上一篇文章的公共函数，写好标量算法的基准测试代码。源代码如下。
public void Scalar() {
ScalarDo(_sourceBitmapData, _destinationBitmapData, 0);
}
public void ScalarParallel() {
ScalarDo(_sourceBitmapData, _destinationBitmapData, 1);
}
public static unsafe void ScalarDo(BitmapData src, BitmapData dst, int parallelFactor = 0) {
int width = src.Width;
int height = src.Height;
int strideSrc = src.Stride;
int strideDst = dst.Stride;
byte* pSrc = (byte*)src.Scan0.ToPointer();
byte* pDst = (byte*)dst.Scan0.ToPointer();
int processorCount = Environment.ProcessorCount;
int batchSize = 0;
if (parallelFactor > 1) {
batchSize = height / (processorCount * parallelFactor);
} else if (parallelFactor == 1) {
if (height >= processorCount) batchSize = 1;
}
bool allowParallel = (batchSize > 0) && (processorCount > 1);
if (allowParallel) {
int batchCount = (height + batchSize - 1) / batchSize; // ceil((double)length / batchSize)
Parallel.For(0, batchCount, i => {
int start = batchSize * i;
int len = batchSize;
if (start + len > height) len = height - start;
byte* pSrc2 = pSrc + start * strideSrc;
byte* pDst2 = pDst + start * strideDst;
ScalarDoBatch(pSrc2, strideSrc, width, len, pDst2, strideDst);
});
} else {
ScalarDoBatch(pSrc, strideSrc, width, height, pDst, strideDst);
}
}二、向量算法
2.1 算法思路
对于24位转8位灰度，可以使用这种办法: 每次从源位图读取3个向量，进行3-元素组的解交织运算，得到 R,G,B 平面数据。随后使用向量化的乘法与加法，来计算灰度值。最后将存储了灰度值的那一个向量，进行3-元素组的交织运算，便能存储到目标位图。
它与“Bgr24彩色位图转为Gray8灰度位图”向量算法的区别，在于最后需做“3-元素组的交织运算”。
例如 Sse指令集使用的是128位向量，此时1个向量为16字节。每次从源位图读取3个向量，就是读取了48字节，即16个RGB像素。最后将灰度向量做“3-元素组的交织运算”，结果是3个向量。将那3个向量存储到目标位图，就是写入了48字节，即16个RGB像素。
对于3-元素组的交织，可以使用 shuffle 类别的指令来实现。例如对于X86架构的 128位向量，可以使用 SSSE3 的 _mm_shuffle_epi8 指令，它对应 NET 中的 Ssse3.Shuffle 方法。源代码如下。
static readonly Vector128<byte> YGroup3Zip_Shuffle_Byte_X_Part0 = Vector128.Create((sbyte)0, -1, -1, 1, -1, -1, 2, -1, -1, 3, -1, -1, 4, -1, -1, 5).AsByte();
static readonly Vector128<byte> YGroup3Zip_Shuffle_Byte_X_Part1 = Vector128.Create((sbyte)-1, 0, -1, -1, 1, -1, -1, 2, -1, -1, 3, -1, -1, 4, -1, -1).AsByte();
static readonly Vector128<byte> YGroup3Zip_Shuffle_Byte_X_Part2 = Vector128.Create((sbyte)-1, -1, 0, -1, -1, 1, -1, -1, 2, -1, -1, 3, -1, -1, 4, -1).AsByte();
static readonly Vector128<byte> YGroup3Zip_Shuffle_Byte_Y_Part0 = Vector128.Create((sbyte)-1, -1, 6, -1, -1, 7, -1, -1, 8, -1, -1, 9, -1, -1, 10, -1).AsByte();
static readonly Vector128<byte> YGroup3Zip_Shuffle_Byte_Y_Part1 = Vector128.Create((sbyte)5, -1, -1, 6, -1, -1, 7, -1, -1, 8, -1, -1, 9, -1, -1, 10).AsByte();
static readonly Vector128<byte> YGroup3Zip_Shuffle_Byte_Y_Part2 = Vector128.Create((sbyte)-1, 5, -1, -1, 6, -1, -1, 7, -1, -1, 8, -1, -1, 9, -1, -1).AsByte();
static readonly Vector128<byte> YGroup3Zip_Shuffle_Byte_Z_Part0 = Vector128.Create((sbyte)-1, 11, -1, -1, 12, -1, -1, 13, -1, -1, 14, -1, -1, 15, -1, -1).AsByte();
static readonly Vector128<byte> YGroup3Zip_Shuffle_Byte_Z_Part1 = Vector128.Create((sbyte)-1, -1, 11, -1, -1, 12, -1, -1, 13, -1, -1, 14, -1, -1, 15, -1).AsByte();
static readonly Vector128<byte> YGroup3Zip_Shuffle_Byte_Z_Part2 = Vector128.Create((sbyte)10, -1, -1, 11, -1, -1, 12, -1, -1, 13, -1, -1, 14, -1, -1, 15).AsByte();
public static Vector128<byte> YGroup3Zip_Shuffle(Vector128<byte> x, Vector128<byte> y, Vector128<byte> z, out Vector128<byte> data1, out Vector128<byte> data2) {
var f0A = YGroup3Zip_Shuffle_Byte_X_Part0;
var f0B = YGroup3Zip_Shuffle_Byte_X_Part1;
var f0C = YGroup3Zip_Shuffle_Byte_X_Part2;
var f1A = YGroup3Zip_Shuffle_Byte_Y_Part0;
var f1B = YGroup3Zip_Shuffle_Byte_Y_Part1;
var f1C = YGroup3Zip_Shuffle_Byte_Y_Part2;
var f2A = YGroup3Zip_Shuffle_Byte_Z_Part0;
var f2B = YGroup3Zip_Shuffle_Byte_Z_Part1;
var f2C = YGroup3Zip_Shuffle_Byte_Z_Part2;
var rt0 = Sse2.Or(Sse2.Or(Ssse3.Shuffle(x, f0A), Ssse3.Shuffle(y, f0B)), Ssse3.Shuffle(z, f0C));
var rt1 = Sse2.Or(Sse2.Or(Ssse3.Shuffle(x, f1A), Ssse3.Shuffle(y, f1B)), Ssse3.Shuffle(z, f1C));
var rt2 = Sse2.Or(Sse2.Or(Ssse3.Shuffle(x, f2A), Ssse3.Shuffle(y, f2B)), Ssse3.Shuffle(z, f2C));
data1 = rt1;
data2 = rt2;
return rt0;
}VectorTraits 库已经集成了上述算法，提供了“Vectors.YGroup3Zip”方法。该方法能够跨平台，它会使用各个平台的shuffle指令。
2.2 算法实现
有了 YGroup3Unzip、YGroup3Zip 方法后，便能方便的编写彩色转灰度的算法了。灰度系数有8位精度，于是需要将 8位数据变宽为16位后，再来计算乘法与加法。最后再将 16位数据，变窄为8位。源代码如下。
public static unsafe void UseVectorsDoBatch(byte* pSrc, int strideSrc, int width, int height, byte* pDst, int strideDst) {
const int cbPixel = 3; // Bgr24
const int shiftPoint = 8;
const int mulPoint = 1 << shiftPoint; // 0x100
const ushort mulRed = (ushort)(0.299 * mulPoint + 0.5); // 77
const ushort mulGreen = (ushort)(0.587 * mulPoint + 0.5); // 150
const ushort mulBlue = mulPoint - mulRed - mulGreen; // 29
Vector<ushort> vmulRed = new Vector<ushort>(mulRed);
Vector<ushort> vmulGreen = new Vector<ushort>(mulGreen);
Vector<ushort> vmulBlue = new Vector<ushort>(mulBlue);
int vectorWidth = Vector<byte>.Count;
int maxX = width - vectorWidth;
byte* pRow = pSrc;
byte* qRow = pDst;
for (int i = 0; i < height; i++) {
Vector<byte>* pLast = (Vector<byte>*)(pRow + maxX * cbPixel); // Bgr24
Vector<byte>* qLast = (Vector<byte>*)(qRow + maxX * cbPixel); // Bgr24 store grayscale.
Vector<byte>* p = (Vector<byte>*)pRow;
Vector<byte>* q = (Vector<byte>*)qRow;
for (; ; ) {
Vector<byte> r, g, b, gray, gray0, gray1, gray2;
Vector<ushort> wr0, wr1, wg0, wg1, wb0, wb1;
// Load.
b = Vectors.YGroup3Unzip(p, p, p, out g, out r);
// widen(r) * mulRed + widen(g) * mulGreen + widen(b) * mulBlue
Vector.Widen(r, out wr0, out wr1);
Vector.Widen(g, out wg0, out wg1);
Vector.Widen(b, out wb0, out wb1);
wr0 = Vectors.Multiply(wr0, vmulRed);
wr1 = Vectors.Multiply(wr1, vmulRed);
wg0 = Vectors.Multiply(wg0, vmulGreen);
wg1 = Vectors.Multiply(wg1, vmulGreen);
wb0 = Vectors.Multiply(wb0, vmulBlue);
wb1 = Vectors.Multiply(wb1, vmulBlue);
wr0 = Vector.Add(wr0, wg0);
wr1 = Vector.Add(wr1, wg1);
wr0 = Vector.Add(wr0, wb0);
wr1 = Vector.Add(wr1, wb1);
// Shift right and narrow.
wr0 = Vectors.ShiftRightLogical_Const(wr0, shiftPoint);
wr1 = Vectors.ShiftRightLogical_Const(wr1, shiftPoint);
gray = Vector.Narrow(wr0, wr1);
// Store.
gray0 = Vectors.YGroup3Zip(gray, gray, gray, out gray1, out gray2);
q = gray0;
q = gray1;
q = gray2;
// Next.
if (p >= pLast) break;
p += cbPixel;
q += cbPixel;
if (p > pLast) p = pLast; // The last block is also use vector.
if (q > qLast) q = qLast;
}
pRow += strideSrc;
qRow += strideDst;
}
}2.3 基准测试代码
随后为该算法编写基准测试代码。
public void UseVectors() {
UseVectorsDo(_sourceBitmapData, _destinationBitmapData, 0);
}
public void UseVectorsParallel() {
UseVectorsDo(_sourceBitmapData, _destinationBitmapData, 1);
}
public static unsafe void UseVectorsDo(BitmapData src, BitmapData dst, int parallelFactor = 0) {
int vectorWidth = Vector<byte>.Count;
int width = src.Width;
int height = src.Height;
if (width <= vectorWidth) {
ScalarDo(src, dst, parallelFactor);
return;
}
int strideSrc = src.Stride;
int strideDst = dst.Stride;
byte* pSrc = (byte*)src.Scan0.ToPointer();
byte* pDst = (byte*)dst.Scan0.ToPointer();
int processorCount = Environment.ProcessorCount;
int batchSize = 0;
if (parallelFactor > 1) {
batchSize = height / (processorCount * parallelFactor);
} else if (parallelFactor == 1) {
if (height >= processorCount) batchSize = 1;
}
bool allowParallel = (batchSize > 0) && (processorCount > 1);
if (allowParallel) {
int batchCount = (height + batchSize - 1) / batchSize; // ceil((double)length / batchSize)
Parallel.For(0, batchCount, i => {
int start = batchSize * i;
int len = batchSize;
if (start + len > height) len = height - start;
byte* pSrc2 = pSrc + start * strideSrc;
byte* pDst2 = pDst + start * strideDst;
UseVectorsDoBatch(pSrc2, strideSrc, width, len, pDst2, strideDst);
});
} else {
UseVectorsDoBatch(pSrc, strideSrc, width, height, pDst, strideDst);
}
}完整源码在 Bgr24ToGrayBgr24Benchmark.cs
三、基准测试结果
3.1 X86 架构
X86架构下的基准测试结果如下。
BenchmarkDotNet v0.14.0, Windows 11 (10.0.22631.4460/23H2/2023Update/SunValley3)
AMD Ryzen 7 7840H w/ Radeon 780M Graphics, 1 CPU, 16 logical and 8 physical cores
.NET SDK 8.0.403
: .NET 8.0.10 (8.0.1024.46610), X64 RyuJIT AVX-512F+CD+BW+DQ+VL+VBMI
DefaultJob : .NET 8.0.10 (8.0.1024.46610), X64 RyuJIT AVX-512F+CD+BW+DQ+VL+VBMI
| Method | Width | Mean | Error | StdDev | Ratio |
|--------------------- |------ |-------------:|-----------:|-----------:|------:|
| Scalar | 1024|1,128.81 us | 4.436 us | 3.932 us |1.00 |
| ScalarParallel | 1024| 157.96 us | 1.007 us | 0.942 us |0.14 |
| UseVectors | 1024| 123.79 us | 1.144 us | 1.014 us |0.11 |
| UseVectorsParallel | 1024| 26.05 us | 0.503 us | 0.471 us |0.02 |
| | | | | | |
| Scalar | 2048|4,279.99 us |37.658 us |35.226 us |1.00 |
| ScalarParallel | 2048| 622.01 us | 3.989 us | 3.537 us |0.15 |
| UseVectors | 2048| 631.53 us | 6.741 us | 6.305 us |0.15 |
| UseVectorsParallel | 2048| 330.47 us | 5.479 us | 4.857 us |0.08 |
| | | | | | |
| Scalar | 4096| 17,252.90 us | 106.215 us |99.353 us |1.00 |
| ScalarParallel | 4096|3,743.78 us |25.989 us |24.310 us |0.22 |
| UseVectors | 4096|3,273.92 us |32.645 us |30.537 us |0.19 |
| UseVectorsParallel | 4096|3,746.83 us |11.083 us | 9.255 us |0.22 |
[*]Scalar: 标量算法。
[*]ScalarParallel: 并发的标量算法。
[*]UseVectors: 矢量算法。
[*]UseVectorsParallel: 并发的矢量算法。
3.2 Arm 架构
同样的源代码可以在 Arm 架构上运行。基准测试结果如下。
BenchmarkDotNet v0.14.0, macOS Sequoia 15.0.1 (24A348)
Apple M2, 1 CPU, 8 logical and 8 physical cores
.NET SDK 8.0.204
: .NET 8.0.4 (8.0.424.16909), Arm64 RyuJIT AdvSIMD
DefaultJob : .NET 8.0.4 (8.0.424.16909), Arm64 RyuJIT AdvSIMD
| Method | Width | Mean | Error | StdDev | Median | Ratio | RatioSD |
|--------------------- |------ |-------------:|-----------:|-----------:|-------------:|------:|--------:|
| Scalar | 1024| 719.32 us | 0.215 us | 0.201 us | 719.34 us |1.00 | 0.00 |
| ScalarParallel | 1024| 157.38 us | 1.423 us | 1.111 us | 157.25 us |0.22 | 0.00 |
| UseVectors | 1024| 169.25 us | 0.538 us | 0.503 us | 169.40 us |0.24 | 0.00 |
| UseVectorsParallel | 1024| 57.81 us | 0.998 us | 2.149 us | 58.11 us |0.08 | 0.00 |
| | | | | | | | |
| Scalar | 2048|2,963.48 us | 6.674 us | 5.211 us |2,961.39 us |1.00 | 0.00 |
| ScalarParallel | 2048| 627.47 us |11.680 us |25.142 us | 616.63 us |0.21 | 0.01 |
| UseVectors | 2048| 716.27 us | 2.097 us | 1.961 us | 717.02 us |0.24 | 0.00 |
| UseVectorsParallel | 2048| 368.49 us | 7.320 us |21.469 us | 378.95 us |0.12 | 0.01 |
| | | | | | | | |
| Scalar | 4096| 12,449.32 us | 177.868 us | 157.676 us | 12,508.13 us |1.00 | 0.02 |
| ScalarParallel | 4096|2,510.22 us |34.541 us |30.620 us |2,501.37 us |0.20 | 0.00 |
| UseVectors | 4096|2,968.72 us |20.503 us |18.175 us |2,965.71 us |0.24 | 0.00 |
| UseVectorsParallel | 4096|1,728.46 us | 4.362 us | 4.080 us |1,729.00 us |0.14 | 0.00 |四、对算法进行检查
以往想对算法进行检查法时，直接对各个字节做相等比较就行了。
但“Bgr24彩色位图转为灰度的Bgr24位图”不适合那样的验证。由于整数运算有精度损失，造成部分像素值会有一些小的偏差。若直接对各个字节做相等比较，那么结果总是 false.
于是可以编写一个统计误差的函数。可通过误差的大小，来判断算法是否正确，以及比较算法的优劣。
private unsafe long SumDifference(BitmapData expected, BitmapData dst, out long countByteDifference, out int maxDifference) {
const int cbPixel = 3; // Bgr24 store grayscale.
long totalDifference = 0;
countByteDifference = 0;
maxDifference = 0;
int maxPosX = -1, maxPosY = -1;
int width = expected.Width;
int height = expected.Height;
int strideSrc = expected.Stride;
int strideDst = dst.Stride;
byte* pRow = (byte*)expected.Scan0.ToPointer();
byte* qRow = (byte*)dst.Scan0.ToPointer();
for (int i = 0; i < height; i++) {
byte* p = pRow;
byte* q = qRow;
for (int j = 0; j < width; j++) {
for (int k = 0; k < cbPixel; ++k) {
int difference = Math.Abs((int)(*q) - *p);
if (0 != difference) {
totalDifference += difference;
++countByteDifference;
if (maxDifference < difference) {
maxDifference = difference;
maxPosX = j;
maxPosY = i;
}
}
++p;
++q;
}
}
pRow += strideSrc;
qRow += strideDst;
}
if (maxDifference > 0) {
//Console.WriteLine(string.Format("SumDifference maxDifference={0}, at ({1}, {2})", maxDifference, maxPosX, maxPosY));
}
return totalDifference;
}在 Setup 方法里增加检查代码。
// Check.
bool allowCheck = true;
if (allowCheck) {
try {
TextWriter writer = Console.Out;
long totalDifference, countByteDifference;
int maxDifference;
double averageDifference;
long totalByte = Width * Height * 3;
double percentDifference;
// Baseline
ScalarDo(_sourceBitmapData, _expectedBitmapData);
// ScalarParallel
ScalarParallel();
totalDifference = SumDifference(_expectedBitmapData, _destinationBitmapData, out countByteDifference, out maxDifference);
averageDifference = (countByteDifference > 0) ? (double)totalDifference / countByteDifference : 0;
percentDifference = 100.0 * countByteDifference / totalByte;
writer.WriteLine(string.Format("Difference of ScalarParallel: {0}/{1}={2}, max={3}, percentDifference={4:0.000000}%", totalDifference, countByteDifference, averageDifference, maxDifference, percentDifference));
// UseVectors
UseVectors();
totalDifference = SumDifference(_expectedBitmapData, _destinationBitmapData, out countByteDifference, out maxDifference);
averageDifference = (countByteDifference > 0) ? (double)totalDifference / countByteDifference : 0;
percentDifference = 100.0 * countByteDifference / totalByte;
writer.WriteLine(string.Format("Difference of UseVectors: {0}/{1}={2}, max={3}, percentDifference={4:0.000000}%", totalDifference, countByteDifference, averageDifference, maxDifference, percentDifference));
// UseVectorsParallel
UseVectorsParallel();
totalDifference = SumDifference(_expectedBitmapData, _destinationBitmapData, out countByteDifference, out maxDifference);
averageDifference = (countByteDifference > 0) ? (double)totalDifference / countByteDifference : 0;
percentDifference = 100.0 * countByteDifference / totalByte;
writer.WriteLine(string.Format("Difference of UseVectorsParallel: {0}/{1}={2}, max={3}, percentDifference={4:0.000000}%", totalDifference, countByteDifference, averageDifference, maxDifference, percentDifference));
} catch (Exception ex) {
Debug.WriteLine(ex.ToString());
}
}字段说明:
[*]totalDifference: 所有像素误差值总和。
[*]countByteDifference: 发生误差的字节总数。
[*]averageDifference: 平均每个字节的误差值。越小越好。
[*]maxDifference: 最大误差值。即输出信息里的“max”。0表示完全匹配，12是正常，34表示误差较大，超过5一般是算法存在问题。
[*]percentDifference: 发生误差的字节总数，在整个图片中的比例。越小越好。
运行程序，可以看到相关的输出信息。
Difference of ScalarParallel: 0/0=0, max=0, percentDifference=0.000000%
Difference of UseVectors: 422400/422400=1, max=1, percentDifference=13.427734%
Difference of UseVectorsParallel: 422400/422400=1, max=1, percentDifference=13.427734%“max”最大为“1”，表示字节的最大误差只有1。整数算法本身是存在舍入误差的，而现在只有1，表示误差已经控制的很好了，算法的质量很高了。
附录
[*]完整源代码: https://github.com/zyl910/VectorTraits.Sample.Benchmarks/blob/main/VectorTraits.Sample.Benchmarks.Inc/Image/Bgr24ToGrayBgr24Benchmark.cs
[*]YGroup3Unzip 的文档: https://zyl910.github.io/VectorTraits_doc/api/Zyl.VectorTraits.Vectors.YGroup3Unzip.html
[*]YGroup3Zip 的文档: https://zyl910.github.io/VectorTraits_doc/api/Zyl.VectorTraits.Vectors.YGroup3Zip.html
[*]VectorTraits 的NuGet包: https://www.nuget.org/packages/VectorTraits
[*]VectorTraits 的在线文档: https://zyl910.github.io/VectorTraits_doc/
[*]VectorTraits 源代码: https://github.com/zyl910/VectorTraits
出处：http://www.cnblogs.com/zyl910/ 版权声明：自由转载-非商用-非衍生-保持署名 | Creative Commons BY-NC-ND 3.0.
来源:https://www.cnblogs.com/zyl910/p/18559733/VectorTraits_Sample_Image_Bgr24ToGrayBgr24Benchmark
免责声明：由于采集信息均来自互联网，如果侵犯了您的权益，请联系我们【E-Mail:cb@itdo.tech】 我们会及时删除侵权内容，谢谢合作！
页:
[1]